IMU Master - Products - XSENS -Movella Xsens MTi-680G RTK GNSS/INS module
Differential RTK Combined Navigation System
Xsens MTi-680G
Products
The MTi-680G represents the highest standard in GNSS/INS (Global Navigation Satellite System/Inertial Navigation System) with an internally integrated real-time kinematic receiver (RTK). With the MTi-680G's RTK function, you can improve your position data from meter to centimeter accuracy. The MTi-680G is equipped with a ruggedized enclosure with IP68 protection from the environment.The MTi-680G has a powerful on-board u-blox ZED F9 RTK GNSS receiver for superior positioning performance.The MTi-680G is part of the MTi 600 series and integrates seamlessly into your application with native CAN support.
Rugged, IP68 rated GNSS/INS
Roll/tilt accuracy of 0.2 degrees, centimeter-level positional accuracy
GNSS receiver with built-in u-blox ZED F9 RTK support
norm | Movella Xsens MTi-680G RTK GNSS/INS module |
Sensor Fusion Performance | |
Roll, Pitch | 0.2 deg RMS |
Yaw/heading | 0.5 deg RMS |
placement | 1cm+1ppm CEP |
tempo | 0.05m/s RMS |
gyros | |
Full scope of the standard | 2000 edg/s |
Bias stability in operation | 8 deg/h |
Bandwidth (-3dB) | 520 Hz |
noise intensity | 0.007 º/s/√Hz |
g-sensitivity (calibr.) | 0.1 º/s/g |
accelerometer | |
Full scope of the standard | 10 g |
Bias stability in operation | 10 (x, y) 15 (z) g |
Bandwidth (-3dB) | 500 Hz |
noise intensity | 60 µg/√Hz |
magnetometer | |
Full scope of the standard | +/- 8G |
Total RMS noise | 1 mG |
nonlinear (math.) | 0.2% |
resolution (of a photo) | 0.25 mG |
GNSS receiver | |
branding | u-blox |
mould | ZED F9 |
RTK correction input | RTCM 3.2/3.3 |
RTCM Input Port | RS232 (38K4-921K6 bit/s) |
barometers | |
Full scope of the standard | 300-1250 hPa |
Total RMS noise | 1.2 Pa |
relative accuracy | +/- 8 Pa (~0.5m) |
Other parameters | |
IP rating | IP68 |
operating temperature | -40 to 85 ºC |
Housing Material | aluminum |
Mounting direction | Unlimited, 360 degree rotation on all axes |
sizes | 56.5x40.9x36.75 mm |
connectors | Main: ODU (AMC HD 12 pins) RTCM: ODU (AMC HD 4 pins) Antenna: SMA |
weights | 98 g |
accreditation | CE, FCC, RoHS |
electric power source | |
Input Voltage | 4.5 -24 V |
Power consumption (typical) | <1 W |
Interface / IO | |
connector | CAN, RS232 |
Synchronization Options | Synchronous input, synchronous output, clock synchronization |
pact | Xbus, ASCII (NMEA) or CAN |
clock drift | 1 ppm |
output frequency | Up to 2 kHz, 400 Hz SDI |
Built-in self-test | Gyroscope, accelerometer, magnetometer, barometer, GNSS |
software suite | |
GUI | MT Manager, Firmware Updater, Magnetic Field Mapper |
SDK (sample code) | C++, C#, Python, Matlab, Nucleo, Public Source Code |
drive (vehicle wheel) | LabVIEW, ROS, GO |
Application of IMU in Featherball Serve Power
In badminton, the serve is not only the key to scoring in the game, but its technical details are also an important factor in influencing the direction of the game.
IMU applied to real-world shooting
A U.S. Army research team recently conducted an innovative experiment in applying IMUs to real-world shooting scenarios, with the goal of accurately measuring
IMU applied to GPS mechanical bird
To address situations where GPS signals are weak or disappear altogether, an interdisciplinary team has worked on a mechanical bird form of localization solution
IMU for assessing neck injury risk while driving
Recently, a joint team of Spanish and Italian researchers successfully developed an innovative in-vehicle monitoring system.
IMU recognizes the location of the golf ball
Recently, a team of Austrian researchers from Europe, in conjunction with universities and industry experts, have developed a new technology by installing IM on golf clubs.