IMU Master - Products - XSENS -Movella Xsens MTi-100/200/300
Attitude & Heading Reference System
Xsens MTi-300
Products
Built-in 3-axis gyroscope and 3-axis acceleration; real-time data update for real-time measurement. Typical inertial measurement unit, all have MEMS device composition. Compact, lightweight, and easy to use.The MTi-200 features vibration suppression gyroscopes to provide high quality inertial data even in challenging environments.The MTi-200's integrated sensor system supports optimized temperature calibration, high-frequency outputs, and has configurable output settings for synchronization with any third-party device.
- Xsens' high-performance product line
- Roll/pitch accuracy of 0.2 degrees, ultra-low heading drift
- Complete SDKs and development kits available
norm | Movella Xsens MTi-300 Attitude & Heading Reference System | |
Sensor Fusion Performance | ||
Roll, Pitch | 0.2 deg RMS | |
Yaw/heading | 1 deg RMS | |
Jetlink Integration (SDI) | be in favor of | |
gyros | ||
Full scope of the standard | 450 deg/s | |
Bias stability in operation | 10 deg/h | |
Bandwidth (-3dB) | 415 Hz | |
noise intensity | 0.01 º/s/√Hz | |
g-sensitivity (calibr.) | 0.003 º/s/g | |
accelerometer | ||
Full scope of the standard | 20 g | |
Bias stability in operation | 15 µg | |
Bandwidth (-3dB) | 375 Hz | |
noise intensity | 60 µg/√Hz | |
magnetometer | ||
Full scope of the standard | +/- 8G | |
Total RMS noise | 0.5 mG | |
nonlinear (math.) | 0.2% | |
resolution (of a photo) | 0.25 mG | |
barometers | ||
Full scope of the standard | 300-1100 hPa | |
Total RMS noise | 3.6 Pa | |
relative accuracy | ~0.08m | |
Other parameters | ||
IP rating | IP67 | |
operating temperature | -40 to 85 ºC | |
Housing Material | aluminum | |
Mounting direction | Unlimited, 360 degree rotation on all axes | |
sizes | 57x41.90x23.60 mm | |
connectors | Fischer SV | |
weights | 55 g | |
accreditation | CE, FCC, RoHS, MIL-STD-202 | |
electric power source | ||
Input Voltage | 3V3, 4.5 -34 V | |
Power consumption (typical) | 520 mW | |
Interface / IO | ||
connector | USB, RS232, RS422, UART | |
Synchronization Options | Synchronous input, synchronous output, clock synchronization | |
pact | Xbus, ASCII (NMEA) | |
clock drift | 10 ppm (or external) | |
output frequency | Up to 2 kHz | |
Built-in self-test | Gyroscope, accelerometer, magnetometer | |
software suite | ||
GUI | MT Manager, Firmware Updater. Magnetic Field Mapper | |
SDK (sample code) | C++, C#, Python, Matlab, Nucleo, Public Source Code | |
drive (vehicle wheel) | LabVIEW, ROS, GO | |
be in favor of | Based on XSENS: online manual, community and knowledge base |
Application of IMU in Featherball Serve Power
In badminton, the serve is not only the key to scoring in the game, but its technical details are also an important factor in influencing the direction of the game.
IMU applied to real-world shooting
A U.S. Army research team recently conducted an innovative experiment in applying IMUs to real-world shooting scenarios, with the goal of accurately measuring
IMU applied to GPS mechanical bird
To address situations where GPS signals are weak or disappear altogether, an interdisciplinary team has worked on a mechanical bird form of localization solution
IMU for assessing neck injury risk while driving
Recently, a joint team of Spanish and Italian researchers successfully developed an innovative in-vehicle monitoring system.
IMU recognizes the location of the golf ball
Recently, a team of Austrian researchers from Europe, in conjunction with universities and industry experts, have developed a new technology by installing IM on golf clubs.